REDARC

South Australian Power Electronics — Engineered to Perform

REDARC Electronics designs and manufactures world-class power management solutions right here in Australia. From the REDWorks integrated power panel range to dual battery chargers, battery management systems and Tow-Pro brake controllers — if you need it to work in the bush, REDARC builds it, and we supply and fit it in Townsville.

Made in Australia
Tow-Pro Fitted In-House
REDWorks Power Panels
In Stock Townsville
Expert System Advice

Towing · Supplied & Fitted in Garbutt

REDARC Tow-Pro Elite V3 — Supplied & Fitted in Townsville

Get your REDARC Tow-Pro Elite V3 electric brake controller supplied and fitted by qualified auto electricians at our Garbutt workshop. Towing a caravan, camper trailer, boat or horse float? We fit Australia's most trusted trailer brake controller to your 4WD or ute for a fixed price.

Standard fit

Tow-Pro Elite V3 — Fitted

  • REDARC Tow-Pro Elite V3 supplied and installed
  • Dash-mounted remote head, neatly wired in
  • Fitted by qualified auto electricians

$850Fitted

Book this fit

Standard fitment — some vehicles excluded. Call with your make and model to confirm.

Caravan & camper pick

Tow-Pro + 12V power

Tow-Pro Elite V3 + Anderson Plug

  • Everything in the standard Tow-Pro V3 fit
  • Anderson plug run to the rear of the vehicle
  • 12V feed for your van, camper or fridge

$1,050Fitted

Book this fit

Standard fitment — some vehicles excluded.

Why the Tow-Pro Elite V3?

Two braking modes, one dial

Proportional mode for highway and gravel; user-controlled mode holds a fixed level for sand, mud and dirt.

Manual override for sway

Apply the caravan brakes on their own to pull a swaying van back into line.

Built for current vehicles

The smaller V3 remote head suits the curved dashes in late-model Rangers, LandCruisers and European 4WDs.

Works with modern trailer brakes

Electric and electric/hydraulic brakes, including AL-KO IQ7.

No calibration routine

Active calibration learns as you drive, so it's ready to tow straight away.

12V and 24V

Suits 4WDs, utes and light trucks, with an ADR-approved installation.

Tow-Pro Fitting FAQ

Not sure if the standard fit suits your vehicle? Call the workshop on 0459 364 303 with your make, model and year.

How much does it cost to have a Redarc Tow-Pro fitted in Townsville?
Our standard Tow-Pro Elite V3 fit is $850 fitted, or $1,050 with an Anderson plug run to the rear of the vehicle. Standard fitment excludes some vehicles, so call 0459 364 303 with your make and model and we'll confirm.
What's the difference between Proportional and User-controlled mode?
Proportional mode senses your vehicle's braking and matches the trailer brakes to it, which suits highway and gravel. User-controlled mode applies a fixed level you set, which is better on sand, mud and dirt.
Will the Tow-Pro V3 fit my new Ranger or LandCruiser?
The V3's smaller remote head is designed for the thicker, curved dash panels in current Rangers, LandCruisers and European vehicles. Give us your vehicle details and we'll confirm the right harness before you book.
Does it work with electric/hydraulic brakes like AL-KO IQ7?
Yes. The V3 works with electric and electric/hydraulic trailer brakes, including AL-KO IQ7, and suits both 12V and 24V vehicles.
Do I need to calibrate the Tow-Pro after it's fitted?
No. The V3 uses active calibration, so there's no setup routine. It learns as you drive.
Why add an Anderson plug to the rear?
It gives your caravan, camper trailer or fridge a 12V feed from the tow vehicle while you drive. We run it in the same visit as your Tow-Pro fit for $1,050 all up.

Towing this season?

Book your Tow-Pro V3 fit at our Garbutt workshop — Unit 1, 66 Pilkington Street.

REDWorks Power Panels — Scout Series

REDWorks Scout Power Panels

The REDARC REDWorks Scout series brings a complete, pre-wired power system in a wall-mountable panel — solar input, DC-DC charging, 240V charging, inverter output, and battery monitoring all in one. Scout panels suit caravans, camper trailers, and ute canopies. Available in 25A, 40A, and 50A charge current versions.

REDWorks Power Panels — Nomad & Pioneer Series

REDWorks Nomad & Pioneer

Step up to the Nomad and Pioneer series for larger off-grid builds. The Nomad suits standalone caravan or cabin installations; the Pioneer50 is REDARC's flagship — 50A charge current with expanded inverter capacity, engineered for serious remote living and full-time off-grid rigs.

Complete System Control

Manager Series & Battery Management

The Manager range combines DC-DC charging, solar regulation, 240V charging and battery monitoring in a single managed system, with RedVision app control on the newer units. This is the step up from a standalone charger when you want one system running the whole build.

Australian Made

Why REDARC?

Founded in 1979 in South Australia, REDARC is one of the only major power electronics brands that still designs and manufactures in Australia. That means faster support, parts availability, and products genuinely engineered for Australian conditions.

🇦🇺

Designed & Made in SA

REDARC designs and manufactures in Lonsdale, South Australia — genuine Australian engineering, not rebadged imports.

🔌

All-in-One Power Panels

REDWorks panels combine DC-DC charger, solar MPPT, inverter, and 240V charger in a single pre-wired unit.

📱

Bluetooth & App Monitoring

Monitor your system from your phone via the RedVision REDARC app — battery state, charge current, and power draw.

🔧

Expert Installation Support

Our team stocks and installs REDARC equipment — professional help available for complex builds.

Ready to upgrade your power system?
Talk to the team in Townsville.

Shop All REDARC Products